ZDY100 is a high-quality new generation full hydraulic core drill rig with the advantages of high productivity and long life. It is designed for solid mineral surface coring and applicable for not only diamond wireline core drilling but also various efficient drilling. Crawler and without crawler types are both avaiable. All functions of ZDY100 rig are operated by hydraulic drive,which makes this drill easy to operate and move,and with precise control as well as high efficiency coring.

TECHNICAL INFORMATION

Drilling Depth Guidelines
	Dry Hole
Drill Rod / Core Barrel	Hole Depth (meters)	Hole Depth (ft)
B	1500	4920
N	1050	3444
H	650	2132
P	450	1476

Prime Mover
	Metric	U.S.
Standard Unit	Cummins 6CTA8.3-C215, liquid cooled, turbo charged, after cooled, diesel engine
Displacement	8.3 L	506 in3
Power (maximum) at 2200 RPM	160 kW	215 hp
Emissions Certifcation	National stage III	Tier 2

Torque and RPM Ratings
(Hydraulic motor at maximum/minimum displacement, prime mover at 2,200 RPM)
	Speed (no load)	Torque (stall)
	RPM	Nm	Ibft
1st	122 - 199	5322 - 3254	3925 - 2400
2nd	246 - 400	2648 - 1620	1953 - 1195
3rd	439 - 714	1486 - 908	1096 - 670
4th	769 - 1250	849 - 519	626 - 383

The core drill rig of full hydraulic and rotator adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world. It is also the developing direction of drilling technique and drilling equipment in China.
This type of drill rig could substitute imported products. It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries.
The drill rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m(11.5 feet) stroke. The rotation of spindle is driven by a single engine. It has four mechanical shifts of range of speeds, and the speed could be adjusted hydraulicly with stepless change.
The rig is simple in structure. It is light and easy for transference; the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation. The spindle hole is in large diameter.

Main Parameters

The figures in these tables have been calculated, based on field experiences, and may be reasonably expected.

Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and equipment used.

Diesel Engine	Model	Cummins 6BTA5.9-C180 (turbocharged and charge water cooled)
	Displacement	5.9L (1.56 US Gallons)
	Power	132Kw (180HP)
	Rated RPM(Factory setting)	2200rpm
Drilling Capacity	BQ	1000m(3280feet)
	NQ	700m(2296 feet)
	HQ	500m(1640 feet)
	PQ	300m(984 feet)
Drill Head	Rotation Motor	Hydraulic Motor-variable Maker: SAUER-DANFOSS
	RPM	Four Shifts/ Stepless Change 0-1100 RPM
	Ratios	1st 14.422:1 2nd 8.171:1 3rd 4.519:1 4th 2.652:1
	Head Opener	Pivoting style, Manual actuated
	Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 222 400 N
	Max. Torque	3700 N·m(2727 lbf·ft)
	Hold Diameter	121 mm(4.76 inch)
	Max. Lifting capacity of Spindle	150 kN(33720 lbf)
	Max. Feeding Power	60 kN(13480 lbf)

Primary Pump	Hydraulic pump Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system.	Maker: DANFOSS 1st Pump：148LPM at 31.5MPa 2nd Pump：120LPM at 28MPa 3rd Pump： 50 LPM at 16MPa
Hydraulic Tank	Capacity	310 L (82 US Gallons)
Capacity of Main Hoist	Hoisting force (single wire)	57kN(12814 lbf) (bare drum)
	Hoisting Speed (single wire)	38-70m/min(bare drum)
	Steel Wire Diameter	18 mm(0.71 inch)
	Steel Wire Length	50 m(164 feet)
Capacity of Wireline Hoist	Hoisting Force (single wire)	1200 Kg(2646 lb) (bare drum)
	Hoisting Speed (single wire)	60-90m/min (bare drum)
	Steel Wire Diameter	5.3 mm(0.2 inch)
	Steel Wire Length	1000 m(3280 feet)
Mast	Mast Height	9.6 m(31.49 feet)
	Mast Adjusting Angle	0°—90°
	Drilling Angle	45º off horizontal to 90ºvertical down
	Feed Pull	15000kg(33075 lb)
	Feed Thrust	6000kg(13230 lb)
	Rod Pull	3m or 6m(9.84feet or 19.68feet)
	Feeding Stroke	3500 mm(137.80 inch)
	Slippage Stroke	600 mm(23.62 inch)
Mud Pump	Type	Reciprocating pump Triplex Plunger
	Model	BW160/10
	Stroke	70mm(2.76 inch)
	Discharge pressure	2.5, 4.0, 6.5, 10.0 Mpa (363, 580, 943, 1450 psi)
Foot Clamp	Clamping Scope	55.5-110 mm(2.19-4.33 inch) through hole Ф154mm(6.06 inch)
Others	Weight (platform type)	9300 Kg(20506 lb)
	Dimensions (L×W×H)	5100×2200×2650mm (200×86.6×104.3 inch)
	Transport Way	Crawler

The YDX-5C new model Full Hydraulic Core Drill Rig is developed with reference of advanced technique of same kind equpi ment at home and abroad.
The drill rig has a reasonable design and superior performance. It is easy for operation and maintenance.
Overall Unit Features：
The drill rig adopts full hydraulic driving, tire trail-type. The drill head is driven by variable motor with function of two-speed mechanical gear shifts, stepless speed change with an advanced and simple structure. The drill head is fed and driven with a system connecting the hollow spindle and oil cylinder with chain. The system has the function, if the piston rods of oil cylinder moving one certain distance, the drill head moving will double the distance. The mast could be adjusted within the range of angle 0 to 90 degree for its drilling hole with a low center of gravity and good stability of the overall unit. The rig provides operator with a nice field of vision and wide and comfortable working condition. The rig looks pretty in overall structure and embodies the design thought of people oriented.

Main Performance Parameters of YDX-5C
The figures in these tables have been calculated, based on field experiences, and may be reasonably expected.
Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and equipment used.

Diesel Engine	Model	Cummins 6CTA8.3-C195 (turbocharged and charge water cooled)
	Displacement	8.3L (2.19 US Gallons)
	Power	145kW (195HP)
	Rated RPM(Factory setting)	2200rpm
Drilling Capacity	BQ	1500 m(4920 feet)
	NQ	1300 m(4264 feet)
	HQ	1000 m(3280 feet)
	PQ	680 m(2230 feet)
Drill Head	Rotation Motor	Double Hydraulic Motors –variable and Reversible Maker：SAUER-DANFOSS
	RPM	Two Shifts/ Stepless Change 0-1145 RPM
	Ratios	1st 8.776:1 2nd 2.716:1
	Head Opener	sidewise sliding way with hydraulic drive
	Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally Closed Type Axial Holding Capacity of 222 400 N
	Max. Torque	4650 N·m(3427 lbf·ft)
	Hold Diameter	121 mm(4.76 inch)
	Max. Lifting capacity of Spindle	150 kN(33720 lbf)
	Max. Feeding Power	75 kN(16860 lbf)

Primary Pump Package	Axial Piston variable displacement Triplex pump for driving of Drill Head Rotation, Main Hoist, Mud Pump & Line Winch.	Maker: DANFOSS 1st Pump：150LPM at 28.5MPa 2nd Pump：120LPM at 25MPa 3rd Pump： 102 LPM at 25MPa
Hydraulic Tank	Capacity	420 L (111 US Gallons)
Capacity of Main Hoist	Hoisting Speed (single wire)	38-70m/min(bare drum)
	Hoisting force (single wire)	77kN(17310 lbf)
	Steel Wire Diameter	18 mm(0.71 inch)
	Steel Wire Length	50 m(164 feet)
Capacity of Wireline Hoist	Hoisting Speed (single wire)	164m/min (bare drum)
	Hoisting Force (single wire)	12 kN(2698 lbf) (bare drum)
	Steel Wire Diameter	6 mm(0.24 inch)
	Steel Wire Length	1500 m(4920 feet)
Mast	Mast Height	11 m(36 feet)
	Mast Adjusting Angle	0°—90°
	Drilling Angle	45°—90°
	Feeding Stroke	3800 mm(150 inch)
	Slippage Stroke	1500 mm(59 inch)
	Feed Pull	15000kg(33075 lb)
	Feed Thrust	7500kg(16538 lb)
	Rod Pull	3m or 6m(9.84feet or 19.68feet)
Mud Pump	Type	Reciprocating Pump Triplex Plunger
	Model	BW250
	Stroke	100mm(3.9 inch)
	Output volume	250,145, 90, 52 L/min (66, 38, 24, 14 US Gallons/min)
	Discharge pressure	2.5, 4.5, 6.0, 6.0 Mpa (363, 653, 870, 870 psi)
Foot Clamp	Clamping Scope	55.5-117.5 mm(2.19-4.63 inch) through hole Ф154mm(6.06 inch)

Other

Weight

10000 Kg(22050 lb)

Working Dimensions (L × W ×H )

5652×2130×10200mm

(222.5×83.9×401.6 inch)

Transport Dimensions (L × W ×H )

5970×2130×2730mm (235×83.9×107.5 inch)

Transport Way

Tire type

The rig equipped with tracks, has a hydraulic driving system. It owns a brief but advanced structure, with its power head driven by a variable motor and its speed adjustable for 2 gears. With the oil cylinder working with a speed-changeable chain, its performance is stable and reliable. The mast is adjustable in the range from 0° to 90° to ensure a proper hole-drilling angle.

The low gravity center of the rig promises a steady operation. And it provides the operators with a convenient and comfortable working circumstance with a wide view. In short, the rig has a beautiful outline and shows a people-oriented design idea.

Main Parameters of YDX-6

Diesel Engine	Model	Cummins 6CTA (turbocharged and charge water cooled)
	Displacement	8.3L (2.19 US Gallons)
	Power	178kW (240HP)
	Rated RPM(Factory setting)	2200rpm
Drilling Capacity	BQ	2000 m(6560 feet)
	NQ	1600 m(5248 feet)
	HQ	1300 m(4264 feet)
	PQ	1000 m(3280 feet)
	Rotation Motor	Double Hydraulic Motor -variable and Reversible Maker: SAUER-DANFOSS
	RPM	Two Shifts/ Stepless Change
		0-1100 RPM
	Ratios	1st 8.776:1 2nd 2.716:1
	Head Opener	sidewise sliding way with hydraulic drive
Drill Head	Hydraulic Chuck(PQ)	Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 222 400 N
	Max. Torque	6400 N·m(4717 lbf·ft)
	Hold Diameter	121 mm(4.76 inch)
	Max. Lifting capacity of Spindle	220 kN(49456 lbf)
	Max. Feeding Power	110 kN(24728 lbf)
Primary Pump	Hydraulic pump: Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system.	Maker: DANFOSS 1st Pump： 200LPM at 31.5MPa 2nd Pump： 120LPM at 28MPa 3rd Pump： 102 LPM at 16MPa
Hydraulic Tank	Capacity	420 L (111 US Gallons)
	Hoisting Speed (single wire)	38-70m/min(bare drum)
Capacity of Main	Hoisting force (single wire)	120kN(26976 lbf)
Hoist	Steel Wire Diameter	22 mm(0.86 inch)
	Steel Wire Length	50 m(164 feet)
Capacity of Wireline Hoist	Hoisting Force (single wire)	15 kN(3372 lbf) (bare drum)
	Steel Wire Diameter	6 mm(0.24 inch)
	Steel Wire Length	2000 m(6560 feet)
	Mast Height	11 m(36 feet)
	Mast Adjusting Angle	0°—90°
	Drilling Angle	45º off horizontal to 90ºvertical down
Mast	Feeding Stroke	3800 mm(150 inch)
	Slippage Stroke	1500 mm(59 inch)
	Feed Pull	22000kg(48510 lb)
	Feed Thrust	11000kg(24255 lb)
	Rod Pull	3m or 6m(9.84feet or 19.68feet)
	Type	Reciprocating Pump Triplex Plunger
	Model	BW320
Mud Pump	Stroke	110mm(4.3 inch)
	Output volume	320,230,165,118 L/min (84.5, 61, 44, 31 US Gallons/min)
	Discharge pressure	4.0, 5.0, 6.0, 8.0 Mpa (580, 725, 870, 1160 psi)
Foot Clamp	Clamping Scope	55.5-117.5 mm(2.19-4.63 inch) through hole Ф154mm(6.06 inch)
	Weight	14500 Kg(31973 lb)
Others	Transport Dimensions (L × W ×H )	5900×2240×2500mm (232.3×88.1×98.4 inch)
	Transport Way	Steel Crawler